About your Remote ID Pro
The Remote ID Pro is a small, self-contained compliant Direct Remote Identification (DRI) device for drones that can be retrofitted into existing drones or implemented during production. It has Wi-Fi, Bluetooth 5, mobile networking (LTE) and GNSS capabilities. The device includes a SIM card, which provides Network Remote Identification (NRI) for 10 years. The Remote ID Pro includes a battery and provides 2+ hours battery time. The battery can both be charged before flight, through USB-C or the MAVLink port, or connected to the drone in flight to utilise the drone’s battery.
- Power switch
Turn on/off - PWR
Power and setup - TRK
Network connection - USB-C port
Charging - MAVLink port
Communication (if applicable)
See Before flight for charging over USB-C or MAVLink, and for what the lights mean.
Included in the box
Section titled “Included in the box”
- Remote ID Pro
Direct and Network Remote ID - USB-C Cable
Charging - Velcro Strips
Two, for mounting on the drone - Quickstart guide
Setup, registration and safety
The Quick Start Guide gives a brief introduction on how to start using the Remote ID Pro and how to register it, followed by some important parameters such as the power supply, battery capacity, connectivity, specifications and finishing with the safety information.
The two provided velcro strips can be used to mount the Remote ID Pro as shown in the picture:
- Remote ID Pro
Mounted on the drone - Velcro Strips
The two provided strips